Page Template:Controls/style.css has no content.
See also the official FAQ.
How do I Rotate?
- You can rotate a componet before it is placed with the hotkey, which by default is .
- A single placed component can be rotated the same way provided it is not connected to anything else.
- A group of connected componets and wire can be rotated by selecting, cutting, rotating and then pasting it. By default this is
-drag, , ,
- There is no way to rotate a portion while it is connected to section that is not roated.
What are the extra RAM input/outpus for?
They allow the RAM to load and store words wider than 64 bits on 64 bit wires.
RAM, Latency RAM and Fast RAM have 4 `Input value` and `Output` pins. Only the first is used when the bitwidth is set to 8, 16, 32 or 64 bits. The first 2 are used when the bit width is set to 128. All 4 are used when the bit width is set to 256.