m (Gelthor moved page Component/8 Bit Register to Component/Register: Page describes all widths not just 8 bit) |
(Added infoboxes) |
||
| Line 1: | Line 1: | ||
== 8 Bit Register == | |||
{{Infobox component | |||
| component = 8 Bit Register | |||
| image = Component Register8.png | |||
| bit-width = 8 | |||
| type = 8bit | |||
| prerequisite = Saving Bytes | |||
}} | |||
The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties. | The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties. | ||
| Line 6: | Line 15: | ||
The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value. | The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value. | ||
== Other sizes == | |||
---- | |||
{{Infobox component | |||
| component = 16 Bit Register | |||
| image = Component Register16.png | |||
| bit-width = 16 | |||
| type = 16bit | |||
| prerequisite = Lab | |||
}} | |||
{{Infobox component | |||
| component = 32 Bit Register | |||
| image = Component Register32.png | |||
| bit-width = 32 | |||
| type = 32bit | |||
| prerequisite = Lab | |||
}} | |||
{{Infobox component | |||
| component = 64 Bit Register | |||
| image = Component Register64.png | |||
| bit-width = 64 | |||
| type = 64bit | |||
| prerequisite = Lab | |||
}} | |||
=== 16 Bit === | |||
Similar to the 8 bit version but with 16 bit inputs and outputs. | |||
=== 32 Bit === | |||
Similar to the 8 bit version but with 32 bit inputs and outputs. | |||
=== 64 Bit === | |||
Similar to the 8 bit version but with 64 bit inputs and outputs. | |||
Latest revision as of 01:53, 27 August 2024
8 Bit Register[edit | edit source]
| |
| Width | 8 |
|---|---|
| Type | 8bit |
| Unlocked by | Saving Bytes |
The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties.
There are 3 inputs and a single output.
The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is a 
or 1 signal on the Load pin.
The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the 
or 0 position, no changes will be made to the value.
Other sizes[edit | edit source]
| |
| Width | 16 |
|---|---|
| Type | 16bit |
| Unlocked by | Lab |
| |
| Width | 32 |
|---|---|
| Type | 32bit |
| Unlocked by | Lab |
| |
| Width | 64 |
|---|---|
| Type | 64bit |
| Unlocked by | Lab |
16 Bit[edit | edit source]
Similar to the 8 bit version but with 16 bit inputs and outputs.
32 Bit[edit | edit source]
Similar to the 8 bit version but with 32 bit inputs and outputs.
64 Bit[edit | edit source]
Similar to the 8 bit version but with 64 bit inputs and outputs.