m (Gelthor moved page 8 Bit Counter to Counter (word): Page describes all widths not just 8 bit) |
(Added infoboxes) |
||
| Line 1: | Line 1: | ||
{{Infobox component | |||
| component = 8 Bit Counter | |||
| image = Component Counter8.png | |||
| bit-width = 8 | |||
| type = 8bit | |||
| prerequisite = Counter | |||
}} | |||
The 8 Bit Counter component behaves somewhat like a register, in that it starts with a value of 0 and can have its value changed. | The 8 Bit Counter component behaves somewhat like a register, in that it starts with a value of 0 and can have its value changed. | ||
| Line 4: | Line 12: | ||
The output pin is always active, so the current value of the counter is always being output. | The output pin is always active, so the current value of the counter is always being output. | ||
== Other sizes == | |||
---- | |||
{{Infobox component | |||
| component = 16 Bit Counter | |||
| image = Component Counter16.png | |||
| bit-width = 16 | |||
| type = 16bit | |||
| prerequisite = Lab | |||
}} | |||
{{Infobox component | |||
| component = 32 Bit Counter | |||
| image = Component Counter32.png | |||
| bit-width = 32 | |||
| type = 32bit | |||
| prerequisite = Lab | |||
}} | |||
{{Infobox component | |||
| component = 64 Bit Counter | |||
| image = Component Counter64.png | |||
| bit-width = 64 | |||
| type = 64bit | |||
| prerequisite = Lab | |||
}} | |||
=== 16 Bit === | |||
Similar to the 8 bit version but with 16 bit inputs and outputs. | |||
=== 32 Bit === | |||
Similar to the 8 bit version but with 32 bit inputs and outputs. | |||
=== 64 Bit === | |||
Similar to the 8 bit version but with 64 bit inputs and outputs. | |||
Revision as of 01:47, 27 August 2024
| |
| Width | 8 |
|---|---|
| Type | 8bit |
| Unlocked by | Counter |
The 8 Bit Counter component behaves somewhat like a register, in that it starts with a value of 0 and can have its value changed.
It has two inputs, an Overwrite Value which can be used to change the counter's value on the next tick; and an Increment/Overwrite toggle. The default behavior is to increment by one on each cycle if a 
signal is connected to the Increment/Overwrite input. If a 
signal is connected to Increment/Overwrite, it will change the value of the counter to the value that is detected on the Overwrite Value pin.
The output pin is always active, so the current value of the counter is always being output.
Other sizes
| |
| Width | 16 |
|---|---|
| Type | 16bit |
| Unlocked by | Lab |
| |
| Width | 32 |
|---|---|
| Type | 32bit |
| Unlocked by | Lab |
| |
| Width | 64 |
|---|---|
| Type | 64bit |
| Unlocked by | Lab |
16 Bit
Similar to the 8 bit version but with 16 bit inputs and outputs.
32 Bit
Similar to the 8 bit version but with 32 bit inputs and outputs.
64 Bit
Similar to the 8 bit version but with 64 bit inputs and outputs.