Component/Register - Revision history

Gelthor: Added infoboxes

2024-08-27T01:53:11Z

Added infoboxes

← Older revision		Revision as of 01:53, 27 August 2024
Line 1:		Line 1:
			== 8 Bit Register ==
			{{Infobox component
			\| component = 8 Bit Register
			\| image = Component Register8.png
			\| bit-width = 8
			\| type = 8bit
			\| prerequisite = Saving Bytes
			}}

	The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties.		The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties.

Line 6:		Line 15:

	The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value.		The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value.

			== Other sizes ==
			----
			{{Infobox component
			\| component = 16 Bit Register
			\| image = Component Register16.png
			\| bit-width = 16
			\| type = 16bit
			\| prerequisite = Lab
			}}
			{{Infobox component
			\| component = 32 Bit Register
			\| image = Component Register32.png
			\| bit-width = 32
			\| type = 32bit
			\| prerequisite = Lab
			}}
			{{Infobox component
			\| component = 64 Bit Register
			\| image = Component Register64.png
			\| bit-width = 64
			\| type = 64bit
			\| prerequisite = Lab
			}}

			=== 16 Bit ===
			Similar to the 8 bit version but with 16 bit inputs and outputs.

			=== 32 Bit ===
			Similar to the 8 bit version but with 32 bit inputs and outputs.

			=== 64 Bit ===
			Similar to the 8 bit version but with 64 bit inputs and outputs.

Gelthor: Gelthor moved page Component/8 Bit Register to Component/Register: Page describes all widths not just 8 bit

2024-08-27T01:39:02Z

Gelthor moved page Component/8 Bit Register to Component/Register: Page describes all widths not just 8 bit

← Older revision	Revision as of 01:39, 27 August 2024
(No difference)

Gelthor: Gelthor moved page 8 Bit Register to Component/8 Bit Register: Should be a subpage under Component

2024-08-22T17:47:27Z

Gelthor moved page 8 Bit Register to Component/8 Bit Register: Should be a subpage under Component

← Older revision	Revision as of 17:47, 22 August 2024
(No difference)

Lupin3rd at 21:29, 30 December 2023

2023-12-30T21:29:05Z

← Older revision		Revision as of 21:29, 30 December 2023
Line 3:		Line 3:
	There are 3 inputs and a single output.		There are 3 inputs and a single output.

	The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is ~~an ON (~~1) signal on the Load pin.		The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is a {{On}} or 1 signal on the Load pin.

	The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When ~~an ON (~~1) signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the ~~OFF (~~0) position, no changes will ~~happen~~ to the value.		The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value.

Lupin3rd: Created page with "The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties. There are 3 inputs and a single output. The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is an ON (1) signal on the Load pin. The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When an ON (1) signal is detected on the Save..."

2023-12-30T21:10:32Z

Created page with "The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties. There are 3 inputs and a single output. The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is an ON (1) signal on the Load pin. The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When an ON (1) signal is detected on the Save..."

New page

The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties.

There are 3 inputs and a single output.

The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is an ON (1) signal on the Load pin.

The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When an ON (1) signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the OFF (0) position, no changes will happen to the value.