Editing Component/Register (section)

== 8 Bit Register ==
{{Infobox component
| component    = 8 Bit Register
| image        = Component Register8.png
| bit-width    = 8
| type         = 8bit
| prerequisite = Saving Bytes
}}

The Register acts as a unit of memory. It is available in 8-bit, 16-bit, 32-bit, and 64-bit varieties.

There are 3 inputs and a single output.

The Load pin controls whether or not the current value is being output on the Output pin. The value is only output when there is a {{On}} or 1 signal on the Load pin.

The Save pin controls whether or not the current value gets overwritten by the value that is detected on the Save Value. When a {{On}} or 1 signal is detected on the Save pin, the value on the Save Value pin is stored. When the Save pin is in the {{Off}} or 0 position, no changes will be made to the value.